One [...]]]> I’m going to say something silly, but I’m sure there are others out there feel the same. I have a hard time throwing out wool scraps. I don’t feel the same about cotton or acrylic yarn and I’m not sure why. There’s just something about the wooly ends. It pains me to toss them.

One night after amassing a large pile of granny square ends, I had an idea. I pulled the plies apart, walked over to the sink where my husband was doing dishes, and doused them with hot water. I added a tiny drop of soap and started rolling them in my hands. Within seconds I had the most adorable little felted bead! Just recently, I made some while the camera was out, and decided to take a few pics for the blog.

How to Make Felted Beads

1. Collect your wool ends. Here are a few from recent projects.

2. Separate the plies. Skip this step with single ply yarn.

3. Pull apart the individual plies until you’ve got a fluffy ball of wool. The fluffier the ball, the more even it will felt.

4. Felt them by hand. Sometimes I use hot water from the tap. Other times I heat a small mug of water in the microwave. Get the wool wet and then squeeze out the excess water. Roll the wool between your palms until it starts to felt. Sometimes a little bit of soap helps get the process going.

Rinse out the soap and you’re left with these little cuties:

I have great ideas for these, but I must admit that they are currently in a jar with a rainbow of other colors. I’d like to make a bracelet or necklace with them. I’d also like to use one as a center for a crochet flower hair tie. In the meantime, I just keep felting and collecting, happy that I’ve found a use for my wooly ends.

What do you do with your yarn scraps?

This year my daughter suggested we make thumbkin pumpkins with the leftover ingredients. She made them [...]]]> It never fails. Whenever I make pumpkin pie, I always have a little bit of squash and pie crust dough left over. I save the squash for muffins, but there’s not much I can do with the dough.

This year my daughter suggested we make thumbkin pumpkins with the leftover ingredients. She made them in school earlier this week and thinks they’re the perfect excuse for eating lots of whipped cream.

We rolled up the leftover dough and divided it into several 1-inch-sized balls. Then she took her thumb and made a little well in the middle.

Since I start with plain pumpkin and not pumpkin pie filling, I had to add some sugar and spice to my squash:

1/2 cup pureed pumpkin
2 1/2 T brown sugar
1/4 t ground cinnamon
1/4 t ground ginger
small pinch of ground cloves

We spooned a small amount of squash into the thumb imprints. Then we baked these on a foil-lined cookie sheet along with the pie.

They turned out great. Personally, I’d add more pumpkin, but I’ve got a whole pie. These are really for my daughter, so as long as she’s happy, I’m happy. She ate them with a very generous dollop of whipped cream.

* * * * *

I hope everyone in the U.S. had a great Thanksgiving! Congratulations to Laura Snazel on winning the Yarn Harlot book. I think I’ll give away another sewing book next week.

julie-k tiny crochet pumpkin

julie-k tiny crochet spider

julie-k glow-in-the-dark ghost

julie-k tiny crochet pumpkin

julie-k tiny crochet spider

julie-k glow-in-the-dark ghost

undead gang from Creepy Cute Crochet

Are you making anything for Halloween? Share in the comments!

When I first moved to Lincoln, it was a no-Starbucks town. As I explored the local coffee shops for my daily iced latte, one of them recommended an iced toddy. It was love at first sip.

If you’ve never had cold brewed coffee, let me tell you it’s the [...]]]>

When I first moved to Lincoln, it was a no-Starbucks town. As I explored the local coffee shops for my daily iced latte, one of them recommended an iced toddy. It was love at first sip.

If you’ve never had cold brewed coffee, let me tell you it’s the most amazing thing ever. It’s less acidic than the hot stuff and therefore easier on your stomach. It also has a subtle sweetness that’s just about perfect, and I say that as someone who cringes at the thought of adding sweetner to a cup of joe.

I immediately purchased a Toddy Coffee Maker so I could make decaf at home and drink it all day long. That’s only a slight exaggeration. My only frustration was the darn filter. They’re supposed to last a few months in the fridge, but mine were only making it through 2-3 brews. Then one day, the Pioneer Woman posted her recipe for The Perfect Iced Coffee and a lightbulb went off. I could make my own reusable filter!

Here’s how I did it:

1. Grab a tea towel, the thinner the better.
2. Fold in half and trace the top of the toddy maker as your pattern.
3. Cut through both layers of the towel to get two circles.
4. Sew circles together right sides facing, leaving a gap for turning.
5. Turn right side out, tops titch around to close up the gap.

I’ve used this a few times and it works great. I just rinse off the grinds and throw it in the wash. If you cold brew at home, quit buying filters and make your own!

project details: I used the tea towels from my failed attempt at coffee grind dyeing, and yes, they’re still blue. I bought my toddy online, but a lot of local coffee shops carry them. Buy local if you can. Here is Ree’s recipe for the Perfect Iced Coffee. Note: I just use coffee and almond milk, but her concoctions sound sinfully delicious.

This is not a product endorsement or paid review. The Toddy folks have no idea who I am. I just love cold brewed coffee and dislike buying disposable filters.

If you have long hair, how do you store your hair ties? I used to keep them on the original cardboards, but they are kind of flimsy and tear easily. I wanted something more sturdy.

Using the plastic leftover from making my place mat sock blockers, I traced the [...]]]>

If you have long hair, how do you store your hair ties? I used to keep them on the original cardboards, but they are kind of flimsy and tear easily. I wanted something more sturdy.

Using the plastic leftover from making my place mat sock blockers, I traced the original cardboards and came up with these.

We’ve been using them for awhile and they are holding up great. It’s really nice to pull them out the basket and not have the elastics fall off. You could use any kind of plastic that can be cut with scissors or even the thick chipboard from a legal notepad.

embarrassing: I went to link to my place mat sock holder post and can’t find it. Did I not share them on the blog? How is that possible? Here’s the tutorial I used. I’ll have to get a pic to share with you.

I’m not sure this is really a “how-to” or more of a crafty public service announcement. We recently had a purple pipe cleaner emergency in our house. (Does anyone else have trouble calling them chenille sticks?)

The project was a rainbow with a pot of gold. We had every [...]]]>

I’m not sure this is really a “how-to” or more of a crafty public service announcement. We recently had a purple pipe cleaner emergency in our house. (Does anyone else have trouble calling them chenille sticks?)

The project was a rainbow with a pot of gold. We had every color of the rainbow except purple. I suggested we go ahead and make the project and fill in the missing color later. Our Artist in Residence balked at that idea. How can you make a rainbow without purple? Details, Mama, details!

So, in an act of desperation, I grabbed a white pipe cleaner and a permanent purple marker. A Sharpie probably would have been best, but all I had was a dry erase marker. It worked remarkably well: I just colored it, waited about a minute and wiped it down with a tissue to make sure it was dry. Crisis averted!

What is it with the noses on stuffed animals? I know my daughter isn’t chewing on them, so how does something like this happen? If you look closely, you can see the original torn nose and the remains of my first patch. I’m becoming an expert on fixing these, so I’m [...]]]>

What is it with the noses on stuffed animals? I know my daughter isn’t chewing on them, so how does something like this happen? If you look closely, you can see the original torn nose and the remains of my first patch. I’m becoming an expert on fixing these, so I’m sharing my little trick with you.

Materials
fabric that matches the original nose (I doubled up for extra durability)
thin cardboard (check your recycle bin for a cereal box or similar)
iron
aluminum foil
sewing notions

Step 1
Measure the nose (I used one of these circle templates) and cut a piece of cardboard the same size and shape. Cut your fabric a little bit larger than the cardboard.

Step 2
Lay down your aluminum foil, then the fabric and finally the cardboard. Fold the foil around the cardboard so the fabric is sandwiched nicely in between.

Step 3
Iron the foil on the top and bottom. Press really well around the edges. Let it cool before opening it up. It will be hot!

Step 4
Remove your perfectly pressed nose and hand stitch it in place.

He looks much happier now, doesn’t he? Hopefully the two layers of fabric will hold up a little longer this time.

My daughter didn’t ask for many things this Christmas. I wasn’t surprised a race track was one of the few items on her list, but I wasn’t expecting a request for a set of racing flags. I figured they’d be easy to make, but they couldn’t look homemade. They were coming from [...]]]>

My daughter didn’t ask for many things this Christmas. I wasn’t surprised a race track was one of the few items on her list, but I wasn’t expecting a request for a set of racing flags. I figured they’d be easy to make, but they couldn’t look homemade. They were coming from Santa, after all. These would make great gifts for the little racing fans in your life — girls and boys alike.

You’ll need a serger for this project. I suggest making a few sets at once. The project itself is super easy, but changing the serger thread is a bit time consuming. It’s definitely not a last minute Christmas Eve project, ahem.

Materials
5″ x 7″ rectangles of various colored fabric (flag definitions here)
3/8″ x 12″ wood dowels
matching thread, three spools each
fray check

Notes
Thread: Those big grab bags of half-used spools of thread at the thrift store are perfect for these. You’ll need a lot of spools, but not a lot of thread.

Changing serger thread: I don’t re-thread my serger every time I change thread. Simply snip the original thread close to the spool and tie on a new spool. Then lift your presser foot to release the tensions and pull the threads through. Try not to run the knots through your tension wheels and be careful with the knot at the needle’s eye. You may have to re-thread the needle. Once new threads are through, drop your presser foot and start serging!

Step 1
Serge all four sides of each rectangle with a rolled hem.

Step 2
Fold one shorter side over 1/2″ and press. Sew the top and side closed, stitching close to the rolled hem. Leave an opening at the bottom for the dowel.

Step 3
Trim ends. Secure the serged ends with Fray Check. Slide flag onto dowel.

storage: A drawstring bag made with the checkered flag fabric would be so cute for these! A mailing tube from the office supply store also works.

confession: I bought new, same brand fat quarters of fabric for this project. It almost killed me to do so, but my daughter is really enjoying the idea of Santa this year, so I caved. Normally I would have raided my fabric stash of scraps for this project. Next time for sure!